eMMC Pro 1.09 Release Notes

[5 JUNE 2017]

We are trying to make more powerful eMMC software with every each update
There are alof of optimizations and progress based on customers requests and demands.
  1. # Detection Routines improved .
  2. # Samsung eMMC Firmware Update ( FFU Update )
  3. # Samsung eMMC Firmware Read
  4. # Qualcomm Disk with eMMC Booster interface selected
  5. # Samsung eMMC Boot Resize ( Partition )
  6. # Samsung eMMC RPBM Resize ( Partition )
  7. # eMMC BOOT CFG Setup
  8. # Samsung eMMC CID Writing / Patch
  9. # MTK Preloader.bin CID Parsing for the UI
  10. # UI - Selection of BOOT Size : 1MB to 8MB
  11. # UI - Selection of RPMB Size : 128KB to 1024KB
  12. # UI - Selection BOOT Configuration
  13. # UI - CID Write Module
  14. # UI - CID Load fr om preloader.bin
  15. # UI - Firmware list with Upgrade and Read options
  16. # New Firmware Released Version = 2017052915210004

When you first run eMMC Pro V1.09 sw will update your firmware .
With the new firmware we have implemented better detection and more features.
and makes it more stable and alot more powerful with more powerful features.

[Samsung eMMC Firmware Update]
Vendor CMDs and sequences implemented in order to update and repair Dead eMMCs

Solution for the known problems :


  • Brick boot
  • Boot Loop
  • SD Mounting Problems
  • E:failed to mount /data (No such file or directory)
  • ODIN Flashing failed on PIT known as PIT Failed.
  • Complete(Write) operation failed.



Firmware List :

Code:
KLM4G1FE3B-B001
KLM8G1WE4A-A001
KLM8G1WEMB-B011
KLM8G1WEMB-B031
KLM8G2FB3B-D001
KLM8G2FB3B-D001
KLM8G2FE3B-B001
KLM8G2YE4C-C001
KLMAG2GE2A-A001
KLMAG2GE4A-A001
KLMAG2GE4A-A002
KLMAG2GEAC-B001
KLMAG2GEAC-B002
KLMAG2WE4A-A002
KLMAG2WEMB-B031
KLMAG4FE4B-B002
KLMAG4FEAB-B002
KLMBG4GE4A-A001
KLMBG4GEAC-B001
KLMCG8GE4A-A001
KMJ5U000WA-B409
KMJ5U000WM-B409
KMJJS000WA-B409
KMJJS000WM-B409
KMK2U000VM-B604
KMK3U000VM-B410
KMK5U000VM-B309
KMK5W000VM-B312
KMK5X000VM-B314
KMK5X000YM-B314
KMK7U000VM-B309
KMK7X000VM-B314
KMK8U000VM-B410
KMKJS000VM-B309
KMKTS000VM-B604
KMKUS000VM-B410
KML5U000HM-B505
KMN5U000ZM-B203
KMN5W000ZM-B207
KMN5X000ZM-B209
KMN9W000RM-B203
KMNJS000ZM-B205
KMS5U000KM-B308
KMS5X000KM-B313
KMSJS000KA-B308
KMSJS000KM-B308
KMV2W000LM-B506
KMV3U000LM-B304
KMV3W000LM-B310
KMVIS000LM-B503
KMVTU000LM-B503
KMVUS000LA-B304
KMVUS000LM-B304
KMVWU000LM-B900
KMVYL000LM-B503

[Samsung eMMC Firmware Read:]
You can read Samsung eMMC Firmware's in case you have New Samsung eMMC in your hand which is not supported !

[Qualcomm Disk with eMMC Booster:]
When there is a Qualcomm disk is connected you can choose eMMC Booster on the interface and write proper dump for it.
eMMC Pro Software handle the procedures directly into Qualcomm Disk !


[Samsung eMMC Boot Resize ( Partition ) :]

Re-Configuring BOOT1 , BOOT2 , RPMB
Configuring Partition Sizes is important if you do not have matching eMMC for another device .
[Solution for :] MTK Devices or any Device for this matter should be able to match the original device (eMMC Configuration ) will let the device work properly .

[eMMC BOOT CFG Setup :]
BOOT Configuration Setup Device (eMMC) to boot in particular Area of the
  • Device
  • BOOT1
  • BOOT2
  • USER Area
  • No Boot



[Samsung eMMC CID Writing / Patch :]
Writing any CID into device will help you configure Samsung eMMCs into any eMMC !
For ex : Hynix CID into Samsung eMMC to act as Hynix eMMC
Solution for : Many MTK Mobile phones with unique CID determined !


[MTK Preloader.bin CID Parsing for the UI ]
Parse the preloader.bin and select in order to make it compatible eMMC CID .


[UI Definitions :]

[BOOT Size : ]

You can select the BOOT Size that you want to configure
1MB , 2MB , 4MB , 8MB


[RPMB Size: ]
You can select the RPMB Size that you want to configure
128KB , 256KB , 512KB , 1024KB


[BOOT Configuration : ]
User selects boot data that will be sent to device

  • Device not boot enabled (default)
  • Boot partition 1 enabled for boot
  • Boot partition 2 enabled for boot
  • User area enabled for boot



[CID Write Module: ]
CID Box acts as Combobox when selected a preloader.bin
Modify and write the require CID into Device .


[CID Load fr om preloader.bin: ]
Small Button with [+] Loads the preloader.bin and parse into Combobox you to select !


[Upgrade Firmware : ]

It will write selected firmware into eMMC
eMMC ID should match with the Firmware otherwise writing process will fail or will not work .

[ New Firmware : 2017052915210004 ]
  • Box Firmware with New Functions and CMDs implemented .


Thank you for all eMMC Pro Customers to keep sending us requests and suggestions .
There is a lot more to come

Best Regards
eMMC Pro Team
Advanced eMMC Repair
eMMC PRo - Universal Device Programmer