النتائج 1 إلى 4 من 4

الموضوع: VolcanoBox 2.1.8

  1. #1


    الحالة
    غير متواجد حاليا
    رقم العضوية
    2640
    الدولة
    tunisie
    نوع الهاتف
    6300
    المشاركات
    670
    شكرا
    61
    تم شكره 156 مرة في122 مشاركة

    Arrow VolcanoBox 2.1.8




    VolcaoBox 2.1.8
    Whats new ?

    World's 1st Added SPD Android Verification system
    World's 1st Added SPD Android Verify your phone is Safe for format
    World's 1st Added SPD Android Verify your phone is Safe for Root
    World's 1st Added SPD Android Verify your phone is Safe for READ INFO
    Added MTK 6260 Read Flash
    Added MTK 6260 Write Flash
    Added MTK 6260 Imei Repair
    Added MTK 6260 Read privacy code
    Adjust MTK Android One-key Root(Solve some phones failed to root)
    Adjust coolsand Read flash bug
    Read Instructions VERY CARE FULLY !!

    About this Update Please Read very Care Fully before you operate any operation !!

    VolcanoBox 2.1.8 Launched world's 1st SPD Android Verify Partitions System. for this Function you can Verify you mobile is SAFE for ROOT or Format or Read info. for this you must have Mobile in Powered ON condition & with Usb Debug mode ON !!. What you have to do it Simply Plug usb cable and click on Partition from Volcano soft and run it. it will tell you is your Phone Supported for SAFE format / ROOT etc or not. If software tell you is safe it will become log in GREEN color and if software tell you is not safe it will show you log in RED color. so here we start...

    If software software show you log like this in GREEN COLOR.... This mean your phone is Supported for SAFE Root, format etc..

    Code:
    Partition as follows. It's supported to format and ROOT the mobile phone. >>mtdparts=sprd-nand:256k(spl),512k(2ndbl),256k(params),512k(vmjaluna),10m(modem),3840k(fixnv),3840k(backupfixnv),5120k(dsp),3840k(runtimenv),10m(boot),10m(recovery),200m(system),190m(userdata),60m(cache),256k(misc),1m(boot_logo),1m(fastboot_logo),3840k(productinfo),512k(kpanic)
    If software show you log like this in RED COLOR.... This mean your phone is NOT supported for SAFE Root, Format etc...

    Code:
    Partition as follows. It's NOT supported to format and ROOT the mobile phone. >>mtdparts=sprd-nand:256k(spl),512k(2ndbl),256k(params),512k(vmjaluna),10m(modem),3840k(fixnv),3840k(backupfixnv),5120k(dsp),3840k(runtimenv),10m(boot),10m(recovery),200m(system),190m(userdata),60m(cache),256k(misc),1m(boot_logo),1m(fastboot_logo),3840k(productinfo),512k(kpanic)
    How to do it ?

    Download & Run 2.1.8
    click on SPD
    Select 6820
    Select One Key Root
    Select Partition
    untick auto pinout
    Plug normal usb cable to mobile in powered on condition
    Usb debug must be Enabled
    Click on run.
    wait few sec it will Show you Logs as i describe above

    Q: what is usefull if phone have pattern lock or any other problem and it have not usb debug Enabled then this option is useless how we can do that ?

    A: Yes it's true that if phone have pattern lock or any other problem and usb debug not Enabled this function is really useless but infact it's not useless. many time we can't found factory files and many time Same working phone we can get from market so here is hint . Take same working phone, Should be 100% same, plug phone with usb and check is it Safe to format or not. if it's safe then you can do it without any problem and if phone is not safe then you simply don't do. so basically we make this function just to verify is phone is SAFE for format, Root etc or not...


    Q: I plug phone but software not recognized or Software hang on "<<" then what to do ?

    A: Perform these Steps

    MAKE SURE YOUR PHONE IS CONNECTED IN POWERED ON CONDITION AND USB DEBUG ENABLED AND ADB ANDROID DRIVERS ARE INSTALLED AND YOU CAN SEE ADB ANDROID PHONE IN DEVICE MANGER !!!!!!

    go to start
    go to run
    type "CMD"
    clck on run
    ( go to Volcanobox 2.1.8 Folder/Tools ) for exmaple you have Volcano 2.1.8 in C: Drive so you should type this these commands. ( write all command without "" and right after every command you should press Enter button from keyboard)

    "C:\" ( Press Enter )

    it will become here
    C:/>

    then type
    "cd VolcanoTool_v2.1.8\tools" ( Press Enter )
    it will become here

    C:/VolcanoTool_v2.1.8\tools>

    then type
    "adb devices"
    now check what it's show to you
    if it's show like this

    * daemon not running. starting it now on port 5037 *
    * daemon started successfully *
    List of devices attached

    C:/VolcanoTool_v2.1.8\tools>

    this mean your phone is not detecting by your computer's ADB.exe

    if it's show like this

    * daemon not running. starting it now on port 5037 *
    * daemon started successfully *
    List of devices attached
    19761202 device

    C:/VolcanoTool_v2.1.8\tools>

    This mean your phone is detect by your computer's ADB.exe

    Type this command
    "adb kill-server" ( press enter button )
    and again
    "adb kill-server" ( press enter button )

    so here you have to do totally two different ways to work with it.
    so we will start

    if you phone not detecting by your computer's ADB.exe then you have to do this
    Keep phone connected

    go to ( in windows Explorer )

    C:\Documents and Settings\"Your name"\.android ( Your name should be your profile name here for exmaple "Jhon", "Anglina" etc )

    there you can see some files
    check do you have "adb_usb.ini" file in that folder or not

    If you have then open it in note pad if not then create new file named "adb_usb.ini" and save it.

    Be sure you save .INI extension not safe in any other format

    for confirm open C: Drive in Windows Explorer
    go to Tools
    click on Folder Options
    click on view
    Untick Hide extension for known file type
    click on ok
    now see that file is exactly "adb_usb.ini" be sure it's not "adb_usb.ini.txt" etc
    so as you done open it in note pad, ( if you already have this file then don't create new one just open it )
    type this in new line and save it
    "0x1782" ( write without "" )
    so after you save file

    open CMD again ( which already opened previously )

    Type these commands

    "adb kill-server" ( press enter button )
    and again
    "adb kill-server" ( press enter button )

    now type
    "adb devices" ( press enter button )

    now it should show like this

    * daemon not running. starting it now on port 5037 *
    * daemon started successfully *
    List of devices attached
    19761202 device

    C:/VolcanoTool_v2.1.8\tools>

    now you are ready to go.

    so right after this disconnect phone and connect it again and type these commands

    "adb kill-server" ( press enter )
    "adb kill-server" ( press enter )
    "adb device" ( press enter )

    as it's show

    * daemon not running. starting it now on port 5037 *
    * daemon started successfully *
    List of devices attached
    19761202 device

    C:/VolcanoTool_v2.1.8\tools>

    Keep this CMD open and go to Volcanobox and perform these steps to know is my phone Supported for SAFE format or not !!


    click on SPD
    Select 6820
    Select One Key Root
    Select Partition
    untick auto pinout
    click on run
    now it will show you your phones details in just 1 sec
    after you can do what ever you want !!


    Code:
    Partition as follows. It's supported to format and ROOT the mobile phone. >>mtdparts=sprd-nand:256k(spl),512k(2ndbl),256k(params),512k(vmjaluna),10m(modem),3840k(fixnv),3840k(backupfixnv),5120k(dsp),3840k(runtimenv),10m(boot),10m(recovery),200m(system),190m(userdata),60m(cache),256k(misc),1m(boot_logo),1m(fastboot_logo),3840k(productinfo),512k(kpanic)
    so from now no more SPD ANDROID PHONE WILL BECOME DEAD IF YOU VERIFY IT BEFORE FORMAT OR ROOT.... Keep in mind we had tested over 110 phones non of phones become dead while verifying !!

    Very special Thanks to Stanner

    [عزيزي الزائر / يتوجب عليك التسجيل للمشاهدة الرابط اضغط هنا للتسجيل ]
    [عزيزي الزائر / يتوجب عليك التسجيل للمشاهدة الرابط اضغط هنا للتسجيل ]

    [عزيزي الزائر / يتوجب عليك التسجيل للمشاهدة الرابط اضغط هنا للتسجيل ]

    [عزيزي الزائر / يتوجب عليك التسجيل للمشاهدة الرابط اضغط هنا للتسجيل ]




    قَالَ رَسُولُ اللَّهِ صَلَّى اللَّهُ عَلَيْهِ وَسَلَّمَ :
    " مَنْ سَتَرَ أَخَاهُ الْمُسْلِمَ ، سَتَرَهُ اللَّهُ يَوْمَ الْقِيَامَةِ ، وَمَنْ نَفَّسَ عَنْ أَخِيهِ كُرْبَةً مِنْ كُرَبِ الدُّنْيَا ، نَفَّسَ اللَّهُ عَنْهُ كُرْبَةً مِنْ كُرَبِ يَوْمِ الْقِيَامَةِ ،
    وَإِنَّ اللَّهَ فِي عَوْنِ الْعَبْدِ مَادَامَ الْعَبْدُ فِي عَوْنِ أَخِيهِ "


    نتعاون مع بعضنا البعض نصبح افضل الشعوب وافضل موقع


  2. #2


    الحالة
    غير متواجد حاليا
    رقم العضوية
    1
    الدولة
    المملكة المغربية
    Sonork
    100.1612070
    المهنة
    اصلاح وفك شفرة الهواتف
    نوع الهاتف
    e1205
    المشاركات
    17,443
    شكرا
    2,037
    تم شكره 994 مرة في631 مشاركة

    افتراضي رد: VolcanoBox 2.1.8

    بارك الله فيك اخي




  3. #3


    الحالة
    غير متواجد حاليا
    رقم العضوية
    13551
    الدولة
    الجزائر
    المشاركات
    50
    شكرا
    0
    تم شكره 0 مرة في0 مشاركة

    افتراضي رد: VolcanoBox 2.1.8

    بارك الله فيك اخي

  4. #4


    الحالة
    غير متواجد حاليا
    رقم العضوية
    16585
    الدولة
    السودان
    المشاركات
    156
    شكرا
    41
    تم شكره 51 مرة في30 مشاركة

    افتراضي رد: VolcanoBox 2.1.8

    كأن التحديث 2.1.9 تأخر هذه المرة ,ربما اكملوا لنا التحديثات ورضوا لنا الفولكانو بوكسا

المواضيع المتشابهه

  1. VolcanoBox 2.0.6
    بواسطة gsm_bouali في المنتدى قسمVolcano Box
    مشاركات: 1
    آخر مشاركة: 05-15-2013, 16:35
  2. VolcanoBox 2.0.2
    بواسطة gsm_bouali في المنتدى قسمVolcano Box
    مشاركات: 2
    آخر مشاركة: 04-12-2013, 19:14
  3. VolcanoBox 1.9.7
    بواسطة gsm_bouali في المنتدى قسمVolcano Box
    مشاركات: 5
    آخر مشاركة: 04-07-2013, 20:25
  4. تحديثات VolcanoBox Ver 1.6.3 Iphone IMEI Check Service FREE for all VolcanoBox Users !!
    بواسطة GSM News & Updates في المنتدى أخــر أخـبـار وتــحديــثـات GSM News & Updates
    مشاركات: 0
    آخر مشاركة: 10-10-2012, 17:30
  5. تحديثات VolcanoBox V1.4.7 Added Huawei U Series Phones //\\ VolcanoBox Will Echo in History
    بواسطة 4gsmmaroc في المنتدى أخــر أخـبـار وتــحديــثـات GSM News & Updates
    مشاركات: 0
    آخر مشاركة: 08-06-2012, 18:11

الكلمات الدلالية لهذا الموضوع

المفضلات

المفضلات

ضوابط المشاركة

  • لا تستطيع إضافة مواضيع جديدة
  • لا تستطيع الرد على المواضيع
  • لا تستطيع إرفاق ملفات
  • لا تستطيع تعديل مشاركاتك
  •  
rss2 - XML - HTML  - Map - rss - sitemap - tags